
Warehouse Racking
Selective, drive-in, push-back, pallet flow and cantilever racking for 1.00 × 1.20 m pallets and long loads.
- Pallet racking
- Drive-in
- Cantilever
Trusted by industrial and distribution operators
Lima Storage & Shelving Systems S.A.C. supplies complete storage systems — not loose parts — so every component is rated, compatible and documented for your inspection file.

Selective, drive-in, push-back, pallet flow and cantilever racking for 1.00 × 1.20 m pallets and long loads.

Gravity roller, belt, flexible and accumulation conveyors that cut manual handling in picking and dispatch.

Tool-free boltless shelving for spare parts, cartons and hand-loaded SKUs, adjustable in 38 mm steps.

Structural, rack-supported and catwalk mezzanines that double usable area without moving facilities.

Wire mesh decking, row spacers, dividers, load labels and partition cages to adapt racks to your inventory.

Column protectors, guard rails, bollards, back guards and safety nets aligned with Ley 29783 workplace safety duties.
Imported racking designed for low-seismic markets can be under-anchored or over-tall for Peru. Our engineering starts with four local realities.
Zone factor, soil type and rack height feed the calculation that defines uprights, base plates, anchors and row spacers.
Garúa fog and marine air in Callao, Lurín and Chilca call for quality powder coat or hot-dip galvanizing in cold and semi-outdoor areas.
Layout drawings, rated capacities and load signage that support your Certificado ITSE and Ley 29783 safety obligations.
Deliveries planned around the Port of Callao, the Panamericana corridors and industrial hubs such as Lurín, Huachipa and Ate.
The right system depends on SKU count, pallets per SKU and how stock must rotate. Use this comparison as a starting point for your layout discussion.

Forklifts enter the lanes to store pallets several deep — maximum density for large lots of the same product.

Pallets ride on nested carts 2–5 deep, giving density with better selectivity than drive-in.

Load from the back, pick from the front — gravity rollers deliver true FIFO for date-coded goods.

Inclined roller lanes present cartons at the pick face, shortening walk time in order picking.

Open-front arms for rebar, pipe, profiles and lumber — essential for construction and mining suppliers.

Portable, stackable frames for temporary or seasonal storage — useful during agro-export peaks.
| System | Storage density | Pallet selectivity | Stock rotation | Typical use in Peru |
|---|---|---|---|---|
| Selective pallet rack | Medium | 100% direct access | Any | Multi-SKU distribution centers in Lurín and Ate |
| Drive-in | Very high | Low | LIFO | Frozen fish, agro-export cold rooms, beverages |
| Push-back | High | Medium | LIFO | FMCG and beverages with 2–5 pallets per SKU |
| Pallet flow | Very high | Medium | FIFO | Perishable food, dairy and pharmaceuticals |
| Carton flow | High (picking) | High | FIFO | E-commerce, spare parts and retail replenishment |
| Cantilever | Medium | High | Any | Rebar, pipe and profiles for construction & mining |

Most rack failures we see in inspections start at a single weak link. These are the parts that carry your load.
Vertical columns with bracing that carry every level down to the slab. Capacity drops sharply with height between beams — never remove a level without recalculating.
Connect uprights and form each storage level. Specify by clear length and rated pair capacity, and always fit safety clips or drop pins.
Supports undersized pallets and loose items while letting sprinkler water and light pass through — a common inspector request.
In seismic zones the anchor and slab are as critical as the steel above. We verify both before handover.
One team from first measurement to the signed handover report — so responsibility for capacity and safety never falls between suppliers.

Aisle widths matched to your forklifts, pallet positions counted and flows checked before a single beam is ordered.

Engineering checks of capacity, anchoring and stability for Peru's seismic zones, delivered as a written report.

Trained crews with plumb and level tolerance checks, plus safe dismantling and relocation of existing systems.

Green/amber/red damage classification with a prioritized repair plan to keep people and stock safe.

Drawings, capacity tables and signage prepared for municipal ITSE inspections and insurer audits.

Special beams, frames, platforms and reel racks for loads that standard catalogues do not cover.
Every project follows the same documented sequence, whether it is a 200 m² parts room or a regional distribution center.
We measure clear height, columns, slab, doors and sprinklers, and record your loads and forklifts.
CAD layout, pallet count and seismic verification to Norma E.030 for your approval.
Components fabricated or imported, consolidated and scheduled to your site.
Assembly, anchoring and tolerance checks with minimal disruption to operations.
Load signage, as-built drawings and an inspection report for your safety file.
Bay width, level height and frame depth all interact. Our engineers configure each bay with you so capacity, clearance and cost stay in balance.
From agro-export cold chains in Ica to mining suppliers in Arequipa, each sector has its own loads, rotation rules and risks.
Blueberry, avocado and grape peaks. Expensive refrigerated m².
Cold rooms must hold maximum pallets while resisting condensation and allowing airflow. Drive-in and pallet flow systems in galvanized finish help packing plants in Ica, La Libertad and Piura move fruit fast and FIFO.
Heavy spares, long steel, critical uptime.
Mining camps and suppliers need heavy-duty pallet racking for spare parts and cantilever racks for rebar, pipe and liners — rated for high loads and protected against forklift impact.
Heavy loads, tight aisles, constant movement.
High-volume SKUs suit push-back and drive-in systems that store more pallets per m² while keeping dispatch fast for routes across Lima Metropolitana.
Thousands of SKUs, from tires to clips.
Combine boltless shelving and carton flow for small parts with tire racks and pallet racking for bulky items — so technicians find parts in seconds.
Drums, totes and regulated materials.
Chemical storage needs spill-conscious layouts, segregation and corrosion-resistant finishes. We design racks for drums and IBC totes with the separation your safety plan requires.
Long loads, warped stock, wasted floor.
Single- and double-sided cantilever racks keep timber, plywood, tubes and profiles straight, dry and easy to pick by forklift or by hand.
Boxes piling up, files impossible to find.
Legal, banking and medical records need compact, labelled storage. High-rise shelving with catwalk mezzanines stores more boxes in the same footprint.
Tangled reels, scattered fittings, lost hours.
Reel racks with axle brackets let crews pull cable straight from the rack, while shelving keeps fittings organised and ready for the next job.
Based in Lima, we plan supply and installation for the country's main industrial and logistics hubs.
Ate, Santa Anita, Los Olivos, Huachipa
Port logistics & bonded warehouses
Southern logistics corridor
Mining supply & manufacturing
Agro-industry & distribution
Northern retail & food hubs
Agro-export & fishing industry
Packing plants & cold rooms
Regional distribution
Central highlands supply
A selection of system types our engineering team has planned and installed — the same methodology we apply to every warehouse in Peru.

Combined pallet racking and cantilever arms with a CAD layout revised mid-project as product mix changed.

A-frame, cantilever and pallet racks integrated in one site with full installation by our crews.

High-capacity installation delivered ahead of schedule while meeting every technical requirement.

Consulting, permits and racking for a growing brand moving into a larger warehouse.

Boltless shelving, cantilever racks and pipe bunks for a repeat distribution client.

Racking supplied and installed on a compressed timeline to meet a store opening date.
Field-tested advice from our engineers, written for buyers and operations teams planning storage in Peru.

Frame depth, beam length and level height worked out from your pallet and load.

When to engage engineering so racking is ready the day you move in.

Five checks that prevent most rack incidents — and how often to run them.

Balancing storage density, aisle width and picking efficiency.
Can't find your answer? Send us your floor plan and load details and an engineer will reply.
Yes. We work across Lima Metropolitana and Callao and schedule projects in the regions, including Arequipa, Trujillo, Chiclayo, Piura, Ica, Cusco and Huancayo. Every regional project starts with a site survey or a verified floor plan so materials and installation crews arrive with a confirmed layout.
Every engineered project is checked for vertical loads and seismic forces using the zoning and soil parameters of Norma Técnica E.030 Diseño Sismorresistente. Upright selection, base plates, anchors, row spacers and height-to-depth ratios are defined from that calculation. We also request floor slab data, because anchoring is only as reliable as the concrete it is fixed to.
Warehouses operating in Peru generally need a valid Certificado ITSE (Inspección Técnica de Seguridad en Edificaciones) from the municipality, and storage changes can be reviewed during inspection. We prepare the documentation inspectors typically request: layout drawings, rated load capacities, anchoring details, aisle widths and load signage.
A typical project runs one to two weeks for survey and CAD layout, three to eight weeks for supply depending on stock and import requirements, and from a few days to several weeks for installation depending on size. We confirm a dated schedule with your purchase order.
Most Peruvian operations use 1.00 x 1.20 m pallets. As a rule of thumb, upright frames are about 15 cm shallower than pallet depth so the load overhangs roughly 7.5 cm front and back, and a beam carrying two 1.00 m pallet faces needs about 2.30 m clear length to keep safe side clearances. Final dimensions come from your load weights and forklift specifications.
For coastal sites such as Callao, Lurín and Chilca we specify industrial powder coating as standard and recommend hot-dip galvanized components for cold rooms, wash-down areas and semi-outdoor yards, combined with periodic inspections of base plates and anchors.
Yes. We recommend a documented expert inspection at least once a year, plus internal checks by your team. Damage is classified with a green, amber and red risk system so you know what can stay in service, what must be repaired and what must be unloaded immediately.
Share your floor plan, pallet size and loads. We'll return a CAD layout and a detailed proposal — no obligation. Email: [email protected]