Warehouse Racking Systems

Heavy-duty industrial pallet racking systems engineered for maximum floor utilization, structural integrity, and seismic performance across commercial logistics facilities.

Engineering Excellence

Industrial Pallet Racking & High-Density Storage Solutions

Lima Storage & Shelving Systems S.A.C. manufactures, supplies, and installs high-strength warehouse racking systems tailored for global procurement standards. Every system is calculated for structural safety, fast accessibility, and earthquake resistance under Norma Técnica E.030.

Selective Pallet Racking System

Selective Pallet Rack

Direct 100% access to every single pallet position. Standard choice for multi-SKU distribution centers.

  • Up to 30ft heights
  • 100% Selectivity
  • Q235B / Q355 Steel
Heavy Duty Cantilever Rack System

Cantilever Racking

Unobstructed horizontal arm support designed specifically for long, bulky, or irregular materials like pipe and lumber.

  • Single & Double Sided
  • Heavy Structural Arms
  • Variable Pitch
Gravity Pallet Flow Rack

Gravity Flow Racking

High-density gravity roller lanes delivering true First-In, First-Out (FIFO) movement for date-sensitive SKUs.

  • Strict FIFO Flow
  • Speed Controllers
  • Integrated Brakes
Portable Industrial Stacking Racks

Stacking Racks

Modular, portable steel frames that allow temporary stacking during seasonal storage peaks without permanent aisles.

  • Portable & Stackable
  • Removable Posts
  • High Deck Load
Pushback Pallet Racking with Nested Carts

Push-Back Racking

Pallets rest on nested wheel carts along inclined rails. Offers 2 to 6 deep Last-In, First-Out (LIFO) storage density.

  • 2-6 Pallets Deep
  • LIFO Management
  • High Lane Fill
High Density Drive In Pallet Racking

Drive-In Racking

Forklifts drive inside structural storage bays to stack pallets several deep, maximizing cold storage space.

  • Maximum Cubes Used
  • Cold Room Friendly
  • Heavy Duty Rails
Multi-level Pick Module Racking System

Multi-Level Pick Modules

Integrated mezzanine platforms with carton flow and pallet racking for high-velocity e-commerce order fulfillment.

  • Multi-Tier Walkways
  • Conveyor Ready
  • High SKU Access
Double Deep Selective Pallet Racking

Double Deep Racking

Stores pallets two-deep back-to-back using deep-reach pantograph trucks, saving aisle space over standard selective rack.

  • 50% Aisle Reduction
  • Deep Reach Access
  • 50% Selectivity
Technical Evaluation

Industrial Storage System Specifications Matrix

Compare operational characteristics across system types to match your facility floor plan, forklift fleet, and rotation requirements.

Technical Parameters & Performance Breakdown
Racking Architecture Volumetric Efficiency Pallet Selectivity Inventory Rotation Recommended Application
Selective Pallet Racking Moderate (60%) 100% Direct Access FIFO / LIFO (Any) General warehouses with wide SKU variety and high turnover rate.
Drive-In Racking Maximum (85%) Low (~15-20%) Strict LIFO Cold storage, agricultural exports, and bulk single-SKU manufacturing.
Push-Back Racking High (75%) Medium (30-50%) LIFO Fast-moving consumer goods (FMCG) with 2 to 6 pallets per SKU.
Pallet Flow Racking Maximum (85%) Medium (Picking face) Strict FIFO Perishable foodstuffs, pharmaceuticals, and date-coded beverage lots.
Cantilever Racking Variable 100% Horizontal Access Any Long steel profiles, rebar, timber, pipes, and heavy construction sheets.
Double Deep Racking High (70%) 50% Direct Access LIFO High-density staging locations operating specialized deep-reach trucks.

Engineering Standards for Industrial Warehouse Racking

At Lima Storage & Shelving Systems S.A.C., we build warehouse storage infrastructure that stands up to severe operational loads and local environmental dynamics. Selecting structural racking for high-bay logistics centers requires rigid structural calculations, verified metallurgy, and accurate floor slab anchoring.

1. Seismic Structural Calculation to Norma Técnica E.030

Peru's coastal and Andean industrial sectors reside in active seismic zones (Zone 4). Under standard operating conditions, standard unrated racking can undergo catastrophic failure under dynamic horizontal forces. Our engineering department evaluates each rack frame design according to Norma Técnica E.030 (Diseño Sismorresistente) and international ANSI/RMI MH16.1 guidelines.

  • Zoning & Soil Coefficients: Base shear calculations account for peak ground acceleration and soil profile factors.
  • Upright Frame Sectional Profiles: Cold-rolled and hot-rolled structural steel columns with stiffened return flanges to resist buckling.
  • Heavy Anchor Footplates: Dual expansion or chemical resin anchors sized to transfer vertical and lateral overturn forces directly to certified concrete slabs.

2. High-Grade Steel Metallurgy & Protective Coatings

Industrial storage systems operate in aggressive industrial conditions, ranging from high-humidity coastal maritime fog in Callao to sub-zero sub-freezing cold storage facilities in agricultural hubs. We manufacture uprights and step beams using premium Q235B and Q355 structural steel grades.

To resist corrosion and mechanical abrasion from forklift impacts, components receive an automated 9-stage pre-treatment wash followed by high-durability electrostatic powder coating cured at 200°C. For wash-down environments, outdoor yards, and high-moisture freezing rooms, hot-dip galvanizing is supplied as standard.

3. Key Component Breakdown

Safety compliance requires understanding how every part functions under load:

  • Upright Frames: Formed by two vertical columns connected by heavy-gauge diagonal and horizontal C-channel bracing. Frame depth must be designed roughly 15 cm narrower than pallet length to ensure uniform beam load distribution.
  • Step & Box Beams: Horizontal load bars featuring heavy-duty 3-to-4 lug end connectors with automatic safety drop pins to prevent accidental dislodging by forklift forks.
  • Wire Mesh Decking: Electro-welded steel wire decks with structural channel supports that sit flush on beams. Improves safety by supporting undersized pallets while adhering to fire protection water-through standards.
  • Column Guards & Guard Rails: Heavy steel floor-mounted protectors surrounding base plates to absorb low-level forklift impact without compromising structural upright stability.
Technical FAQ

Frequently Asked Questions by Purchasing Managers

Key information regarding technical specifications, safety permits, and project delivery schedules.

What standards are used to design your seismic warehouse racking systems?

Our engineered warehouse racking systems comply fully with Peruvian Building Code Norma Técnica E.030 (Diseño Sismorresistente), ANSI/RMI MH16.1 specifications, and FEM standards. Structural calculations account for seismic zone factors, ground acceleration, slab concrete strength, and height-to-depth ratios.

Which racking system offers the highest storage density for standardized goods?

Drive-In and Pallet Flow racking systems deliver maximum volume utilization. Drive-In racking eliminates operating aisles for last-in, first-out (LIFO) inventory, while Pallet Flow racking uses gravity rollers for high-density first-in, first-out (FIFO) product movement.

Can racking configurations be customized for 1.00 x 1.20 m industrial pallets?

Yes. Every system engineered by Lima Storage & Shelving Systems S.A.C. is custom-dimensioned around standard 1.00 x 1.20 m pallets or specialized oversized loads, providing safe side clearances, optimized beam lengths, and correct forklift turning radii.

Do you provide municipal ITSE safety documentation support?

Yes. We prepare complete engineering handbooks required for municipal Certificado ITSE audits, including CAD layout drawings, certified capacity load charts, anchor structural validation reports, and workplace safety signage matching Ley 29783 mandates.

How do you address humidity corrosion in coastal warehouse locations?

For high-humidity coastal facilities in Callao, Lurín, and Chilca, we utilize multi-stage epoxy electrostatic powder coating or full hot-dip galvanizing to protect structural steel against saline fog and condensation.

Ready to Optimize Your Warehouse Layout?

Send your floor plan drawing, pallet sizes, and load requirements directly to our engineering team. We will deliver a CAD layout and structural cost quotation.

Direct Sales Engineering: [email protected]

Contact Us